Spacelog Apollo 8

Apollo 8, Houston. Over.

Apollo 8, Houston. Over.

Apollo 8, Apollo 8, this is Houston, Houston. Over.

Roger, Houston. We read you loud and clear. How do you read us?

Apollo 8, this is Houston. Reading you loud and clear now. And verify your evaporator water control panel switch to the AUTO position. Over.

Roger. I am sure it is in AUTO.

Roger.

Burn status report as follows: burn on time, burn time 4 minutes 6-1/2 seconds, VG_X minus 1.4, attitude is nominal, no trim, VG_Y was zero, VG_Z was plus 0.2, DELTA-V_C was minus 20.2, orbit 169.1 by 60.5.

Apollo 8, Houston. Roger. The burn on time, burn time of 4:06.5, VG_X is minus 1.4.

Apollo 8, Houston. Verify your EVAP water control on panel 382 is AUTO. Your EVAP OUT temperature is high. Over.

Roger. Standing by.

Houston, Apollo 8. Roger. Primary EVAP is AUTO, H₂ flow AUTO. Do you recommend activating the secondary water boiler?

Roger. Copy. Stand by.

Apollo 8, this is Houston. Reverify manual valve on panel 382, evaporator water control AUTOMATIC. Over.

Roger. Verified.

Apollo 8, this is Houston. Recommend you activate your secondary water evaporator.

Secondary EVAP coming on line.

Roger.

Apollo 8, Houston. Turn off your DSE, and we will go to high bit rate. Over.

Roger.

Apollo 8, this is Houston. And I will continue my readback of the burn status report. Copied VG_X zero, VG_Y zero, VG_Z 1.2, DELTA-V Charlie minus 20.2. Over.

Stand by; he's getting the chart out again.

DELTA-VG_Z was 0.2.

Roger. Understand; 0.2 on VG_Z.

Houston, this is Apollo 8. We are on malfunction 1 of 6, going through step 1 to step 2. Over.

Apollo 8, Houston. Roger. Copy.

Correction. That is to step 4.

Roger. Copy; to step 4.

Now to step 13.

Roger. Step 13.

Now to step 14.